Skip to content

Design review (mechanical pass) — 2026-09-21

Generated by tools/design_review.py from each active card's KiCad netlist (pin types come from the Eagle symbols, so a wrongly typed symbol pin can produce a false hit; every HIGH item was checked by hand before being acted on). Severity: HIGH = would stop the card working or damage parts; MED = unreliable; LOW = housekeeping.

One board of the mechanical pass of 2026-09-21; every board: hardware/reviews/mechanical-2026-09-21.md.

cards/sequencer-memory/accessories/eeprom-adaptor/kicad

2 parts, 5 nets, 2 ICs, 0 bus-connector nets, rails GND, VCC

  • HIGH rail VCC has no source on this card (no connector/header pin, no power output); 7 pins on it
  • HIGH rail GND has no source on this card (no connector/header pin, no power output); 3 pins on it
  • LOW decoupling: 0 100 nF-class caps for 2 ICs

Last updated 26 October 2026