Design review (mechanical pass) — 2026-09-21¶
Generated by tools/design_review.py from each active card's KiCad netlist (pin types come from the Eagle symbols, so a
wrongly typed symbol pin can produce a false hit; every HIGH item was checked by hand before being acted on).
Severity: HIGH = would stop the card working or damage parts; MED = unreliable; LOW = housekeeping.
One file per board, in the board's own reviews/ folder:
| Board | Review | Findings |
|---|---|---|
| bus/backplane/kicad/v2.0 | v2.0-mechanical-2026-09-21.md |
LOW 1 |
| bus/blank-card/kicad/v3.1 | v3.1-mechanical-2026-09-21.md |
none |
| bus/blank-card/kicad/v3.2 | v3.2-mechanical-2026-09-21.md |
none |
| bus/bus-jumper-horizontal/kicad/v3.2 | v3.2-mechanical-2026-09-21.md |
none |
| bus/bus-jumper-vertical/kicad/v3.0 | v3.0-mechanical-2026-09-21.md |
none |
| bus/bus-template/kicad/v3.2 | v3.2-mechanical-2026-09-21.md |
none |
| cards/alu/kicad/v3.2 | v3.2-mechanical-2026-09-21.md |
none |
| cards/bus-tester/kicad/v1.1 | v1.1-mechanical-2026-09-21.md |
none |
| cards/bus-tester/kicad/v3.1 | v3.1-mechanical-2026-09-21.md |
none |
| cards/io/kicad/v1.1 | v1.1-mechanical-2026-09-21.md |
MED 1 |
| cards/mem-register/kicad/v1.0 | v1.0-mechanical-2026-09-21.md |
none |
| cards/mem-switch/kicad/v1.1 | v1.1-mechanical-2026-09-21.md |
none |
| cards/memory/kicad/v1.3 | v1.3-mechanical-2026-09-21.md |
none |
| cards/protocard/kicad/v1.0 | v1.0-mechanical-2026-09-21.md |
none |
| cards/register/kicad/v1.1 | v1.1-mechanical-2026-09-21.md |
none |
| cards/sequencer-logic/kicad/v2.1 | v2.1-mechanical-2026-09-21.md |
none |
| cards/sequencer-memory/accessories/eeprom-adaptor/kicad | eeprom-adaptor-mechanical-2026-09-21.md |
HIGH 2, LOW 1 |
| cards/sequencer-memory/kicad/v2.1 | v2.1-mechanical-2026-09-21.md |
none |
| cards/video/kicad/v1.1 | v1.1-mechanical-2026-09-21.md |
MED 2 |
Notes¶
- 2026-10-26: one file per board. The run of 2026-09-21 wrote one file,
hardware/DESIGN-REVIEW.md, with a section per board. Each section is now the board's own file above, its text unchanged (the heading, the summary line, the findings), andtools/design_review.pywrites this layout: the per-board files and this index. - The 2026-09-21 text is kept as it was run. A rerun on the tree of 2026-10-26 (
--date 2026-09-21 --out DIRwrites the set for comparison) reproduces all 19 boards' files byte for byte. It adds video v1.2, v1.3 and v2.0, which have netlists now: v1.2 and v1.3 have no findings, and v2.0 one LOW, the open-collector/INTOC(IC27.8), which goes through JP3 to the bus-INT, pulled up by the I/O card's RN2. A new run writes a new dated set beside this one. - 2026-10-26, two fixes to
tools/design_review.py: - Rails are matched by the last part of a hierarchical net name. The two bus jumpers' ground net is
/Sheet 1/GNDsince the readable converted schematics (902e9bf); before the fix it was not seen as a rail. - An open-collector net with no pull-up on the card that reaches the bus connector, directly or across a jumper or
header, is LOW ("its pull-up must be on another card"), not MED. Such a net is a bus line pulled up elsewhere,
like
-INTby the I/O card.
Last updated 26 October 2026